logo

CuriousTab

CuriousTab

Surveying problems


  • 1. Pick up the correct statement from the following :

  • Options
  • A. Box sextant is used for the measurement of horizontal angles
  • B. Cross staff is used for setting out right angles
  • C. Gradiometer is used for setting out any required gradient
  • D. Line ranger is used for locating intermediate stations on a survey line
  • E. All the above.
  • Discuss
  • 2. ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is

  • Options
  • A. 90°
  • B. 120°
  • C. 210°
  • D. 270°
  • Discuss
  • 3. The intercept of a staff

  • Options
  • A. is maximum if the staff is held truly normal to the line of sight.
  • B. is minimum if the staff is held truly normal to the line of sight.
  • C. decreases if the staff is tilted away from normal
  • D. increases if the staff is tilted towards normal.
  • Discuss
  • 4. Closed contours of decreasing values towards their centre, represent

  • Options
  • A. a hill
  • B. a depression
  • C. a saddle or pass
  • D. a river bed.
  • Discuss
  • 5. Hydrographic surveys deal with the mapping of

  • Options
  • A. large water bodies
  • B. heavenly bodies
  • C. mountaineous region
  • D. canal system
  • E. movement of clouds.
  • Discuss
  • 6. The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to

  • Options
  • A. the distance between the zero of gradient and the foot of the staff
  • B. twice the distance between the zero of graduation and the foot of the staff
  • C. thrice the distance between the zero of graduation and the foot of the staff
  • D. none of the above.
  • Discuss
  • 7. In chain surveying field work is limited to

  • Options
  • A. linear measurements only
  • B. angular measurements only
  • C. both linear and angular measurements
  • D. all the above.
  • Discuss
  • 8. Diopter is the power of a lens having a focal length of

  • Options
  • A. 25 cm
  • B. 50 cm
  • C. 75 cm
  • D. 100 cm
  • E. 125 cm
  • Discuss
  • 9. In quadrantal bearing system, back bearing of a line may be obtained from its forward bearing, by

  • Options
  • A. adding 180°, if the given bearing is less than 180°
  • B. subtracting 180°, if the given bearing, is more than 180°
  • C. changing the cardinal points, i.e. substituting N for S and E for W and vice-versa
  • D. none of these.
  • Discuss
  • 10. If the radius of a simple curve is R, the length of the chord for calculating offsets by the method of chords produced, should not exceed.

  • Options
  • A. R/10
  • B. R/15
  • C. R/20
  • D. R/25.
  • Discuss

First 5 6 7 ... 20 .. 34 35 Last