Curioustab

Home » Civil Engineering » Surveying

The main principle of surveying is to work

from part to the whole
from whole to the part
from higher level to the lower level
from lower level to higher level.

Correct Answer: from whole to the part

← Previous Question Next Question→

More Questions from Surveying

Keeping the instrument height as 1.5 m, length of staff 4 m, the slope of the ground as 1 in 10, the sight on the down-slope, must be less than
Pick up the correct statement from the following :
If S is the length of a subchord and R is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to
The slope correction for a length of 30 m along a gradient of 1 in 20, is
Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm focal length. The focal length of the combination is
Plane-table (plan table) surveying: Identify the method of surveying in which field observations and map plotting proceed simultaneously in the field, so that the plan is drawn directly while sights are taken.
Theodolite traversing and plotting accuracy: Which method is considered the most reliable for plotting a theodolite traverse to minimize graphical error?
Slope correction in chaining: For end points with level difference h over a measured slope length l, the exact horizontal distance is √(l² − h²). Expanding in series gives the slope correction c ≈ (h² / 2l) + (h⁴ / 8l³) + … . The second term may be neglected if h over a 20 m distance is less than approximately what value?
Automatic/dumpy level sensitivity: The radius of curvature of the arc of a bubble tube (spirit level) is generally kept approximately equal to which value to achieve suitable sensitivity in ordinary levelling?
Angular form of slope correction: If θ is the ground slope angle and l is the measured sloping distance between two points, what is the correction to reduce l to horizontal length?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion