Home » Civil Engineering » Surveying

Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm focal length. The focal length of the combination is

10 cm
20 cm
30 cm
40 cm

Correct Answer: 30 cm

← Previous Question Next Question→

More Questions from Surveying

Plane-table (plan table) surveying: Identify the method of surveying in which field observations and map plotting proceed simultaneously in the field, so that the plan is drawn directly while sights are taken.
Theodolite traversing and plotting accuracy: Which method is considered the most reliable for plotting a theodolite traverse to minimize graphical error?
Slope correction in chaining: For end points with level difference h over a measured slope length l, the exact horizontal distance is √(l² − h²). Expanding in series gives the slope correction c ≈ (h² / 2l) + (h⁴ / 8l³) + … . The second term may be neglected if h over a 20 m distance is less than approximately what value?
Automatic/dumpy level sensitivity: The radius of curvature of the arc of a bubble tube (spirit level) is generally kept approximately equal to which value to achieve suitable sensitivity in ordinary levelling?
Angular form of slope correction: If θ is the ground slope angle and l is the measured sloping distance between two points, what is the correction to reduce l to horizontal length?
Levelling set-up for true difference in elevation: To obtain the most accurate true difference in elevation between points A and B using a single set-up (to eliminate collimation error), where should the level be placed?
Theodolite terminology and faces: Choose the correct set of statements regarding a transit theodolite and the definitions of left face and right face during observation.
Bowditch (compass) rule—departure corrections: For a closed traverse of perimeter L with closing error in departure ΔD, what is the correction to the departure of a side of length l according to Bowditch’s rule?
Closed traverse with missing data: In a closed traverse, which of the following can be computed from the remaining measurements when one element is omitted?
Theodolite components and functions: Select the correct consolidated statement regarding the tangent screw, the levelling head (tribrach), and the levelling screws used to set the vertical rotation axis.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion