Curioustab

Home » Civil Engineering » Surveying

If L is the perimeter of a closed traverse, ΔD is the closing error in departure, the correction for the departure of a traverse side of length l, according to Bowditch rule, is

.

Correct Answer: .

← Previous Question Next Question→

More Questions from Surveying

For a closed traverse the omitted measurements may be calculated
Pick up the correct statement from the following :
The sensitiveness of a level tube decreases if
The limiting length of an offset does not depend upon
If f1 and f2 are the distances from the optical centre of a convex lens of focal length f to conjugate two points P1 and P2 respectively, the following relationship holds good
True meridians are generally preferred to magnetic meridians because
Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to
The bearings of the lines AB and BC are 146° 30' and 68° 30'. The included angle ABC is
For the construction of highway (or railway)
A bearing of a line is also known as

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion