The guideways are of

More Questions from Production Engineering

• High speed steel cutting tools operate at cutting speeds __________ than carbon steel tools.
• The material which on machining produces chips with built up edge is
• The continuous chips are in the form of long coils having the same thickness throughout.
• The chisel edge angle of a drill is usually 120° to 135°.
• The main purpose of a boring operation, as compared to drilling, is to
• In down milling, the thickness of chip is
• The cutting speed for drilling copper with high speed steel drills varies from
• Climb milling is chosen while machining because
• The high cutting speed and large rake angle of the tool will result in the formation of
• Gear burnishing is a process for

Discussion & Comments