For a = - 1, find the value of V2

More Questions from Exam Questions Papers

• The specific gravity of tungsten is 13.8 and its atomic weight is 184.0 Assume that there are two free elements per atom. Then the Fermi level or characteristic energy for the crystal in eV will be
• As the temperature increases the mobility of electrons __________ .
• In the circuit below, delay of the EXOR and AND Logic gates are 20 μs and 10 μs respectively, then the wave y' and y (with initial condition y = 1) will be :
• The ratio of the diffusion coefficient in a semiconductor has the units
• The amplitude of a pair of composite sinusoidal signal y(n) = x1(n) + x2(n) with x1(n) = sin (5pn) x2(n) = 3 sin (5pn) is __________ .
• A TV picture is to be transmitted over a channel of 6 MHz bandwidth at a 35 dB S/N ratio. The capacity of the channel is
• If the system T.F. is The differential equation representing the system is
• What are the values of Emax and Emin displayed on the oscilloscope, when a 1 kV P-P carries is modulated to 50%?
• A n-channel JFET has IDSS = 2 mA, Gate to source voltage VGS = - 2 V and trans-conductance is 0.5 mW then pinch-off voltage is __________ .
• Suppose that the modulating signal is m(t) = 2cos (2pfmt) and the carrier signal is xC(t) = AC cos(2pfct), which one of the following is a conventional AM signal without over modulation?

Discussion & Comments