Home » Electronics and Communication Engineering » Exam Questions Papers

The ratio of the diffusion coefficient in a semiconductor has the units

V-1
em.V-1
V.cm-1
V.s

Correct Answer: V-1

Explanation:

← Previous Question Next Question→

More Questions from Exam Questions Papers

The amplitude of a pair of composite sinusoidal signal y(n) = x1(n) + x2(n) with x1(n) = sin (5pn) x2(n) = 3 sin (5pn) is __________ .
A TV picture is to be transmitted over a channel of 6 MHz bandwidth at a 35 dB S/N ratio. The capacity of the channel is
If the system T.F. is The differential equation representing the system is
What are the values of Emax and Emin displayed on the oscilloscope, when a 1 kV P-P carries is modulated to 50%?
A n-channel JFET has IDSS = 2 mA, Gate to source voltage VGS = - 2 V and trans-conductance is 0.5 mW then pinch-off voltage is __________ .
Suppose that the modulating signal is m(t) = 2cos (2pfmt) and the carrier signal is xC(t) = AC cos(2pfct), which one of the following is a conventional AM signal without over modulation?
A MOSFET has a threshold voltage of 1 V and oxide thickness of 500 x 10-8 [εr = 3.9; ε0 = 8.85 x 10-14 F/cm, q = 1.6 x 10-19 c]. The region under the gate is ion implanted for threshold voltage tailoring. The base and type of impant required to shift threshold voltage to - 1 V are __________ .
If x1[n] x1(z) with ROC = R1 and x2[n] x2(z) with ROC = R2 then ROC for x1[n] + x2[n] will be __________ (where Ri → Region of convergence and x1[n] and x2[n] are causal).
If the power spectral density of stationary random process is a sine-squared function of frequency, the shape of its autocorrelation is
A transmission line has a characteristic impedance of 50 Ω and a resistance of 0.1 Ω/m, if the line is distortion less, the attenuation constant (in Np/m) is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion