Home » Electronics and Communication Engineering » Exam Questions Papers

What are the values of Emax and Emin displayed on the oscilloscope, when a 1 kV P-P carries is modulated to 50%?

Q: What are the values of Emax and Emin displayed on the oscilloscope, when a 1 kV P-P carries is modulated to 50%?

Emax - Emin = 0.5 x 1 kV = 0.5 kV 2Emax = 1.5 kVi, Emax = 0.75 kV Emin = 0.25 kV.

2 kV, 0.5 kV
1 kV, 0.5 kV
0.75 kV, 0.25 kV
0.5 kV, 1.5 kV

Correct Answer: 0.75 kV, 0.25 kV

Explanation:

E_max - E_min = 0.5 x 1 kV = 0.5 kV

2E_max = 1.5 kVi, E_max = 0.75 kV

E_min = 0.25 kV.

← Previous Question Next Question→

More Questions from Exam Questions Papers

A n-channel JFET has IDSS = 2 mA, Gate to source voltage VGS = - 2 V and trans-conductance is 0.5 mW then pinch-off voltage is __________ .
Suppose that the modulating signal is m(t) = 2cos (2pfmt) and the carrier signal is xC(t) = AC cos(2pfct), which one of the following is a conventional AM signal without over modulation?
A MOSFET has a threshold voltage of 1 V and oxide thickness of 500 x 10-8 [εr = 3.9; ε0 = 8.85 x 10-14 F/cm, q = 1.6 x 10-19 c]. The region under the gate is ion implanted for threshold voltage tailoring. The base and type of impant required to shift threshold voltage to - 1 V are __________ .
If x1[n] x1(z) with ROC = R1 and x2[n] x2(z) with ROC = R2 then ROC for x1[n] + x2[n] will be __________ (where Ri → Region of convergence and x1[n] and x2[n] are causal).
If the power spectral density of stationary random process is a sine-squared function of frequency, the shape of its autocorrelation is
A transmission line has a characteristic impedance of 50 Ω and a resistance of 0.1 Ω/m, if the line is distortion less, the attenuation constant (in Np/m) is
Consider a stable and causal system with impulse response h(t) and system function H(S). Suppose H(S) is rational, contains a pole at S = - 2, and does not have a zero at the origin. The location of all other poles and zero is unknown for each of the following statements. Let us determine whether statement is true or false. f[h(t) e-3t] converges h(t) has finite duration H(s) = H(- s) Choose correct option.
During transmission over a communicate channel, bit errors occur independently with probability . If a block of 3 bits are transmitted, the probability of at most one bit error is equal to
Denominator polynomial of a transfer function of certain network is: s3 + s2 + 2s + 24 Then the network is:
In the circuit shown, in switch S is open for a long time and is closed at t = 0. The current i(t) for t ≥ 0+ is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion