logo

CuriousTab

CuriousTab

Discussion

Home ‣ Civil Engineering ‣ Steel Structure Design Comments
  • Question

  • In case horizontal stiffeners are not used, the distance between vertical legs of flange angles at the top and bottom of a plate girder, is known as


  • Options
  • A. overall depth
  • B. clear depth
  • C. effective depth
  • D. none of these.

  • Correct Answer
  • clear depth 

    • Steel Structure Design problems

    Search Results

    • 1. If W and L are the total superimposed load and the span of a plate girder in metres, the approximate self weight (W) of the girder, is taken as

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
      • Discuss
    • 2. If L is the overall length of a combined footing having A as its area, d being the distance between the centre of gravity of the base and centre of the base, the larger width b is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 3. If M is the moment due to a couple in a bearing plate whose width is b and allowable bending stress is P, the thickness (t) of the bending plate of the column splice, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
      • Discuss
    • 4. According to the Unwin's formula, if t is thickness of the plate in mm, the nominal diameter of the rivet, is

    • Options
    • A. d = 1.91 t
    • B. d = 1.91 t2
    • C. d = 1.91 t
    • D. d = 1.91 t
    • E. d = 2.3 t
      • Discuss
    • 5. The central deflection of a simply supported steel beam of length L with a concentrated load W at the centre, is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 6. A fillet weld whose axis is parallel to the direction of the applied load, is known as

    • Options
    • A. diagonal filler weld
    • B. end fillet weld
    • C. side fillet weld
    • D. all the above.
      • Discuss
    • 7. Effective length of a column effectively held in position and restrained in direction at both ends, is

    • Options
    • A. L
    • B. 0.67 L
    • C. 0.85 L
    • D. 1.5 L
    • E. 2 L
      • Discuss
    • 8. A riveted joint may experience

    • Options
    • A. shear failure
    • B. shear failure of plates
    • C. bearing failure
    • D. bearing failure of rivets
    • E. all the above.
      • Discuss
    • 9. Perforated cover plates are particularly suitable for built up sections consisting of

    • Options
    • A. channels placed back to back
    • B. channels placed toe to toe
    • C. four angle box section
    • D. all the above.
      • Discuss
    • 10. The allowable stress in axial tension is generally kept less if thickness of the member is more than

    • Options
    • A. 10 mm
    • B. 12 mm
    • C. 15 mm
    • D. 20 mm
    • E. 22 mm
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.