Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Digital Electronics
»
Integrated-Circuit Logic Families
Logic circuits that are designated as buffers, drivers, or buffer/drivers are designed to have:
a greater current/voltage capability than an ordinary logic circuit.
greater input current/voltage capability than an ordinary logic circuit.
a smaller output current/voltage capability than an ordinary logic.
greater input and output current/voltage capability than an ordinary logic circuit.
Correct Answer:
a greater current/voltage capability than an ordinary logic circuit.
← Previous Question
Next Question→
More Questions from
Integrated-Circuit Logic Families
Power-supply decoupling uses a radio-frequency capacitor to short out high frequency spikes.
The CMOS series that is pin-compatible with the TTL family is the 4000 series.
The fan-out of CMOS gates is frequency dependent.
The 74XX series TTL operates using saturated switching in which many of the transistors, when conducting, will be in the saturated condition.
The maximum current for a LOW output on a standard TTL gate is 100 µA.
A major drawback in using ECL logic circuits in conjunction with TTL and MOS circuits is its negative supply voltages and logic levels.
Integrated injection logic offers high component density and is easier to fabricate than TTL.
The noise immunity of a logic circuit refers to the circuit's ability to tolerate noise by causing spurious charges in the output voltage.
A current-sourcing transistor may also be referred to as a pull-down transistor.
An unused input of a NAND gate can be left unconnected, pulled high by a pull-up resistor and tied together with another input and not change the logic output.
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments