Curioustab

Home » Digital Electronics » Digital System Projects Using HDL

In the frequency counter, if the clock generator produces a 100 kHz system clock signal, how many decade counters are required to measure 1 Hz?

6
5
4
3

Correct Answer: 5

← Previous Question Next Question→

More Questions from Digital System Projects Using HDL

In the digital clock project, when does the PM indicator go high?
Which is not a step in strategic planning for HDL development?
In a frequency counter, what happens at high frequencies when the sampling interval is too long?
In the keypad application, just after the 4 ms mark the simulation imitates the release of the key by changing the column value back to F hex, which causes the d output to go into its Hi-Z state. On the next rising clock edge, what happens to dav?
In the frequency counter, the pulse width of the enable signal is very critical for taking an accurate frequency measurement.
A frequency counter is a circuit that can measure and display the frequency of a signal.
In the digital clock project HDL, the 1 pps signal is used as a synchronous clock for all of the counters' stages, which are synchronously cascaded.
In the digital clock project, the 60 Hz signal is sent through a Schmitt-trigger circuit to produce sine wave pulses at the rate of 60 pps.
One CASE construct inside another CASE construct is called a do-loop.
In HDL when a circuit is simulated on a computer, the designer must create all the different scenarios that will be experienced by the actual circuit and must also know the proper response to those inputs.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion