Curioustab

Home » Civil Engineering » Tunnelling

The length of the needle beam used in needle beam method of tunnelling is usually

2 m to 4 m
2.5 m to 6 m
4 m to 7 m
5 m to 6 m

Correct Answer: 5 m to 6 m

← Previous Question Next Question→

More Questions from Tunnelling

For hauling muck from the tunnel, the following type of muck-car is used :
In case of drift method of tunnelling, the drift may be excavated at
Which one of the following methods is generally used for the layout of the muck-car tracks
Which one of the following methods of tunnelling does not require the use of time bearing :
Which one of the following statements is not correct for heading and benching method of tunnelling?
The following operations are generally employed for tunnelling in hard rock. 1. Removing ground water, 2. Loading holes and firing the explosive 3. Setting up and drilling 4. Grouting and lining 5. Removing muck 6. Ventilation and removing explosion dust The correct sequence is :
The method of draining in the tunnels, is generally known as
Pick up the correct statement regarding drilling a tunnel from the following:
For tunnels exceeding 300 m in length, the grade should be provided below
Railway tunnels, are generally

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion