Curioustab

Home » Civil Engineering » Tunnelling

For highways, tunnelling is preferred to if the open cut exceeds :

10 metres depth
15 metres depth
20 metres depth
25 metres depth.

Correct Answer: 15 metres depth

← Previous Question Next Question→

More Questions from Tunnelling

The cut of a tunnel face is shown in given figure. This is called
The tunnels, the artificial underground passages are constructed for :
The length of the needle beam used in needle beam method of tunnelling is usually
For hauling muck from the tunnel, the following type of muck-car is used :
In case of drift method of tunnelling, the drift may be excavated at
Which one of the following methods is generally used for the layout of the muck-car tracks
Which one of the following methods of tunnelling does not require the use of time bearing :
Which one of the following statements is not correct for heading and benching method of tunnelling?
The following operations are generally employed for tunnelling in hard rock. 1. Removing ground water, 2. Loading holes and firing the explosive 3. Setting up and drilling 4. Grouting and lining 5. Removing muck 6. Ventilation and removing explosion dust The correct sequence is :
The method of draining in the tunnels, is generally known as

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion