Curioustab

Home » Civil Engineering » Highway Engineering

Road width 8.8 m of two lane National highways or State highways in mountainous terrain

excludes the width of parapet (0.6 m)
excludes the width of side drain (0.6 m)
excludes the width of parapet and side drain
includes the width of parapet and side drain

Correct Answer: excludes the width of parapet and side drain

← Previous Question Next Question→

More Questions from Highway Engineering

For maximum strength and durability minimum percentage of cement, by weight is
If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves,
Reconnaissance is best done with the help of
Curves in the same direction separated by short tangents, are called
Bottom-most component of a flexible pavement, is
In ideal pavement is constructed with
Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2, is
Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is
If the radii of a compound curve and a reverse curve are respectively the same, the length of common tangent
Design of horizontal curves on highways, is based on

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion