Curioustab

Home » Civil Engineering » Highway Engineering

According to IRC : 52-1973, for a single lane National Highway in hilly region,

width of the carriageway must be 3.75 m
shoulders on either side must be 1.25 m
total width of the road-way must be 6.25 m
total of the above.

Correct Answer: total of the above.

← Previous Question Next Question→

More Questions from Highway Engineering

Reinforcement in cement concrete slab of road pavements, is placed
Road width 8.8 m of two lane National highways or State highways in mountainous terrain
For maximum strength and durability minimum percentage of cement, by weight is
If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves,
Reconnaissance is best done with the help of
Curves in the same direction separated by short tangents, are called
Bottom-most component of a flexible pavement, is
In ideal pavement is constructed with
Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2, is
Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion