Curioustab

Home » Digital Electronics » Counters

Modulus refers to ________.

a method used to fabricate decade counter units
the modulus of elasticity, or the ability of a circuit to be stretched from one mode to another
an input on a counter that is used to set the counter state, such as UP/DOWN
the maximum number of states in a counter sequence

Correct Answer: the maximum number of states in a counter sequence

← Previous Question Next Question→

More Questions from Counters

The decimal equivalent of the largest number that can be stored in a 4-bit binary counter is ________.
A J-K flip-flop is reset and must stay reset after the clock pulse. This transition requires that ________.
A BCD counter has ________ states.
The duty cycle of the most significant bit from a 4-bit (0–9) BCD counter is ________.
The circuit shown below is used for ________, and for the inputs shown, the DATA output will be ________.
In order to check the CLR function of a counter, ________.
A decade counter will count through decimal ________.
The ________ counter in the Altera library has controls that allow it to count up or down, and perform synchronous parallel load and asynchronous cascading.
A(n) ________ one-shot starts a pulse in response to a trigger and will restart the internal pulse timer every time a subsequent trigger edge occurs before the pulse is complete.
It is a characteristic of ring counters that the ________ equal to the number of flip-flops in the register.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion