A decade counter will count through decimal ________.

More Questions from Counters

• The ________ counter in the Altera library has controls that allow it to count up or down, and perform synchronous parallel load and asynchronous cascading.
• A(n) ________ one-shot starts a pulse in response to a trigger and will restart the internal pulse timer every time a subsequent trigger edge occurs before the pulse is complete.
• It is a characteristic of ring counters that the ________ equal to the number of flip-flops in the register.
• An asynchronous binary up counter, made from a series of leading edge-triggered flip-flops, can be changed to a down counter by ________.
• A sequential circuit design is used to ________.
• ________ is the output frequency of the counter shown below.
• One method of troubleshooting involves ________ the circuit under test with a ________ or ________ and then observing the output to check for proper bit patterns.
• The given circuit represents a(n) ________.
• Many parallel counters use ________ presetting whereby the counter is preset on the active transition of the same clock signal that is used for counting.
• The technique used by one-shots to respond to an edge rather than a level is called ________.

Discussion & Comments