Curioustab

Home » Digital Electronics » Counters

The circuit shown below is used for , and for the inputs shown, the DATA output will be .

multiplexing, 1
parallel-to-serial conversion, 0
demultiplexing, 0
parallel-to-serial conversion, HIGH

Correct Answer: parallel-to-serial conversion, 0

← Previous Question Next Question→

More Questions from Counters

In order to check the CLR function of a counter, ________.
A decade counter will count through decimal ________.
The ________ counter in the Altera library has controls that allow it to count up or down, and perform synchronous parallel load and asynchronous cascading.
A(n) ________ one-shot starts a pulse in response to a trigger and will restart the internal pulse timer every time a subsequent trigger edge occurs before the pulse is complete.
It is a characteristic of ring counters that the ________ equal to the number of flip-flops in the register.
An asynchronous binary up counter, made from a series of leading edge-triggered flip-flops, can be changed to a down counter by ________.
A sequential circuit design is used to ________.
________ is the output frequency of the counter shown below.
One method of troubleshooting involves ________ the circuit under test with a ________ or ________ and then observing the output to check for proper bit patterns.
The given circuit represents a(n) ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion