Curioustab

Home » Digital Electronics » Counters

The ________ counter in the Altera library has controls that allow it to count up or down, and perform synchronous parallel load and asynchronous cascading.

74134
LPM
synchronous
AHDL

Correct Answer: LPM

← Previous Question Next Question→

More Questions from Counters

A(n) ________ one-shot starts a pulse in response to a trigger and will restart the internal pulse timer every time a subsequent trigger edge occurs before the pulse is complete.
It is a characteristic of ring counters that the ________ equal to the number of flip-flops in the register.
An asynchronous binary up counter, made from a series of leading edge-triggered flip-flops, can be changed to a down counter by ________.
A sequential circuit design is used to ________.
________ is the output frequency of the counter shown below.
One method of troubleshooting involves ________ the circuit under test with a ________ or ________ and then observing the output to check for proper bit patterns.
The given circuit represents a(n) ________.
Many parallel counters use ________ presetting whereby the counter is preset on the active transition of the same clock signal that is used for counting.
The technique used by one-shots to respond to an edge rather than a level is called ________.
Assume you want to determine the timing diagram for a 4-bit counter using an oscilloscope. The best choice for an oscilloscope trigger signal is ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion