The amplitude of a pair of composite sinusoidal signal y(n) = x1(n) + x2(n) with

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Exam Questions Papers See What Others Are Saying!

Question
The amplitude of a pair of composite sinusoidal signal y(n) = x₁(n) + x₂(n) with x₁(n) = sin (5pn) x₂(n) = 3 sin (5pn) is __________ .
Options
A. 2
B. 3
C. 4
D. 1

Correct Answer

2

Explanation

Amplitude =

The amplitude of a pair of composite sinusoidal signal y(n) = x1(n) + x2(n) with x1(n) = sin (5pn) x

.

More questions

2. What are the values of E_max and E_min displayed on the oscilloscope, when a 1 kV P-P carries is modulated to 50%?
Options
A. 2 kV, 0.5 kV
B. 1 kV, 0.5 kV
C. 0.75 kV, 0.25 kV
D. 0.5 kV, 1.5 kV

3. For air filled circular waveguides
Options
A. the attenuation due to imperfect conducting walls is negligible
B. the attenuation due to imperfect dielectric is negligible
C. both the attenuation i.e. due to imperfect conducting walls and due to imperfect dielectric are significant
D. the total attenuation is almost zero

4. When .4546 E 5 and .5433 E 7 are to be added in normalized floating point mode
Options
A. none of the numbers is changed to any other form
B. .4546 E 5 is changed .004546 E 7 and .5433 E 7 is not changed
C. .5433 E 7 is changed to 54.33 E 5 and .4546 E 5 is not changed
D. both the numbers are changed and their exponents are made equal to 6

5. A short circuited stub is preferred to an open circuited stub because an open circuited stub
Options
A. is more difficult to fabricate and construct
B. is made of transmission line of different Z₀
C. is liable to radiate
D. is incapable of giving full range of reactance

6. As compared to an ordinary semiconductor diode, a Schottky diode
Options
A. has lower cut in voltage
B. has higher cut in voltage
C. lower reverse saturation current
D. both (b) and (c)

8. A rectangular wave guide has two stubs each of length connected at the source end. The stubs are circuited. Then the stubs present
Options
A. an infinite impedance in shunt with line
B. an infinite impedance in series with line
C. a zero impedance in shunt with line
D. a finite impedance in shunt with line

Comments

There are no comments.

More in Electronics and Communication Engineering: