Curioustab

Home » Digital Electronics » Shift Registers

How can parallel data be taken out of a shift register simultaneously?

Use the Q output of the first FF.
Use the Q output of the last FF.
Tie all of the Q outputs together.
Use the Q output of each FF.

Correct Answer: Use the Q output of each FF.

← Previous Question Next Question→

More Questions from Shift Registers

Stepper motors have become popular in digital automation systems because ________.
What type of register would have a complete binary number shifted in one bit at a time and have all the stored bits shifted out one at a time?
A serial in/parallel out, 4-bit shift register initially contains all 1s. The data nibble 0111 is waiting to enter. After four clock pulses, the register contains ________.
What is the preset condition for a ring shift counter?
In a 6-bit Johnson counter sequence there are a total of how many states, or bit patterns?
How much storage capacity does each stage in a shift register represent?
What is a recirculating register?
A modulus-12 ring counter requires a minimum of ________.
A bidirectional 4-bit shift register is storing the nibble 1101. Its input is HIGH. The nibble 1011 is waiting to be entered on the serial data-input line. After three clock pulses, the shift register is storing ________.
An 8-bit serial in/serial out shift register is used with a clock frequency of 2 MHz to achieve a time delay (td) of ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion