Curioustab

Home » Digital Electronics » Integrated Circuit Technologies

The active switching element used in all TTL circuits is the ________.

bipolar junction transistor (BJT)
field-effect transistor (FET)
metal-oxide semiconductor field-effect transistor (MOSFET)
unijunction transistor (UJ)

Correct Answer: bipolar junction transistor (BJT)

← Previous Question Next Question→

More Questions from Integrated Circuit Technologies

In a TTL circuit, if an excessive number of load gate inputs are connected, ________.
PMOS and NMOS circuits are used largely in ________.
Which is not an output state for tristate logic?
A TTL NAND gate with IIH(max) of 40 µA per input drives ten TTL inputs. How much current does the drive output source?
An open-drain gate is the CMOS counterpart of ________.
Which factor does not affect CMOS loading?
A certain gate draws 1.8 µA when its output is HIGH and 3.3 µA when its output is LOW. VCC is 5 V and the gate is operated on a 50% duty cycle. What is the average power dissipation (PD)?
One output structure of a TTL gate is often referred to as a ________.
The nominal value of the dc supply voltage for TTL and CMOS is ________.
If ICCH is specified as 1.1 mA when VCC is 5 V and if the gate is in a static (noncharging) HIGH output state, the power dissipation (PD) of the gate is ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion