The difference in the lengths of two diagonals of a rail diamond is

More Questions from Railways

• Fastenings — select the typical overall depth (length) of a standard dog spike used in Indian permanent way practice.
• History of Indian gauge selection — as Consulting Engineer to the Government of India, W. Simms recommended which gauge for Indian Railways?
• Railway track materials: Which sleeper type most closely satisfies the requirements of an ideal sleeper in terms of durability, gauge holding, low maintenance, and resistance to environmental damage?
• Wheelset geometry: The distance between the inner faces of a railway wheelset’s flanges relative to the track gauge is kept…
• Permanent way on sharp curves: What is the standard clearance between the inner running rail and its check rail provided on sharp curves?
• Ballast maintenance terminology: In routine track upkeep, “boxing of ballast” is carried out primarily at which location relative to the rails and sleepers?
• Turnout geometry: If α is the switch angle and R is the radius of the turnout curve, what is the approximate length of the tongue rail?
• Joint detail in continuously welded rail (CWR): A welded rail joint is generally arranged to be…
• Rail fastenings: For holding the rail in position, chairs are not used with which rail section?
• Cast-iron “pot” sleepers: Which configuration correctly describes the arrangement of bowls (pots) and tie bars in pot-type sleepers?

Discussion & Comments