Home » Civil Engineering » UPSC Civil Service Exam Questions

Ratio of bearing capacity of double Under Reamed (U.R.) pile to that of single U.R. pile is nearly

Correct Answer: 1.5

← Previous Question Next Question→

More Questions from UPSC Civil Service Exam Questions

Consider the following statements regarding Plane Table surveying : 1. It is less accurate than chain surveying. 2. It is not necessary to do accurate centering of plane table for small scale survey. 3. Compass rule may be made use for adjusting the plane table transverse. 4. From the instrument station, resectors are drawn to plot the position of object in the field. Of these statements :
A horizontal rod AB carries three loads of 3.0 kg, 7.0 kg and 10.0 kg at distances of 2.0 cm, 9.0 cm and 15 cm respectively from A where it is hinged. Neglecting the weight of the rod, which is the point at which the rod will be balance?
Two simply supported beams B1 and B2 have spans l and 2l respectively. Beam B1 has a cross-section of 1 x 1 units and beam B2 has a cross-section of 2 x 2 units. These beams are subjected to concentrated loads W each at the centre of their spans. The ratio of the maximum flexural stress in these beams is
A locomotive has four pairs of driving wheels carrying an axle load of 24 x 104 N. The maximum load that can be pulled if the coefficient of friction is 1/6, is
A particle of mass 3 kg moving in a straight line decelerates uniformly from a speed of 40 m/s to 20 m/s in a distance of 300 m. Before it comes to rest, it will travel a further distance pf
A cylindrical shell made of mild steel plate of 100 cm diameter is to be subjected to an internal pressure of 10 kg/cm2. If the material yields at 2000 kg/cm2, assuming factor of safety as four and using maximum principal stress theory, thickness of the plate will be
In the force system shown in the figure, the force CA should be
Consider the following strengths of concrete : 1. Cube strength 2. Cylinder strength 3. Split-tensile strength 4. Modulus of rupture The correct sequence in decreasing order of these strengths is
The graphical condition for equilibrium of concurrent forces is that
A close-coiled helical spring with n coils, mean radius R and diameter d is subjected to an axial load W. What is the compression in the spring?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion