Curioustab

Home » Civil Engineering » Structural Design Specifications

The test strength of the sample is taken as the average of the strength of

2 specimens
3 specimens
4 specimens
5 specimens

Correct Answer: 3 specimens

← Previous Question Next Question→

More Questions from Structural Design Specifications

The reduced level of third floor of a building near a column is 205.350 m. The reduced levels of the undersides of four beams supporting the fourth floor framing into the column mutually perpendicular are 208.350 m, 208.450 m, 208.500 m and 208.550 m. The supported length of the column is
Pick up the correct statement from the following:
The distance of the critical section for shear from the periphery of the column or drop panal is at a distance (where d is effective depth of flat slab).
In limit state method, the design bond stress of M 30 grade concrete for plain bars in tension, is
The maximum characteristic strength of the stirrups reinforcement, is taken
Pick up the correct statement from the following:
Minimum thickness of steel work directly exposed to weather and accessible for cleaning and repainting, the thickness should be not less than
A simply supported beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is
The slenderness ratio of a tie in a roof truss if subjected to action of wind and seismic forces, should not be greater than
The value of the constant K in the formula for determining the minimum area of tension reinforcement in a beam is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion