Curioustab

Home » Civil Engineering » Structural Design Specifications

For rolled I-beams and channels, permissible tensile and compressive stresses does not exceed

1400 kg/cm2
1500 kg/cm2
1650 kg/cm2
1800 kg/cm2

Correct Answer: 1650 kg/cm2

← Previous Question Next Question→

More Questions from Structural Design Specifications

For the reinforced concrete member totally immersed in sea water, the normal cover provided for the reinforcing bars is further increased by
The test strength of the sample is taken as the average of the strength of
The reduced level of third floor of a building near a column is 205.350 m. The reduced levels of the undersides of four beams supporting the fourth floor framing into the column mutually perpendicular are 208.350 m, 208.450 m, 208.500 m and 208.550 m. The supported length of the column is
Pick up the correct statement from the following:
The distance of the critical section for shear from the periphery of the column or drop panal is at a distance (where d is effective depth of flat slab).
In limit state method, the design bond stress of M 30 grade concrete for plain bars in tension, is
The maximum characteristic strength of the stirrups reinforcement, is taken
Pick up the correct statement from the following:
Minimum thickness of steel work directly exposed to weather and accessible for cleaning and repainting, the thickness should be not less than
A simply supported beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion