Curioustab

Home » Civil Engineering » RCC Structures Design

If the permissible compressive stress for a concrete in bending is C kg/m2, the modular ratio is

2800/C
2300/2C
2800/3C
2800/C2

Correct Answer: 2800/3C

← Previous Question Next Question→

More Questions from RCC Structures Design

The design of a retaining wall assumes that the retained earth
To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is
The depth of the centre of gravity (y) of the resultant compressive stress from the compression edge of the T-beam specified in Q. 13.52 is given by
If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
Distribution of shear intensity over a rectangular section of a beam, follows :
An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is
If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance x from either end where x is
The maximum ratio of span to depth of a cantilever slab, is
The width of the rib of a T-beam, is generally kept between
The advantage of reinforced concrete, is due to

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion