Curioustab

Home » Civil Engineering » RCC Structures Design

The advantage of reinforced concrete, is due to

monolithic character
fire-resisting and durability
economy because of less maintenance cost
moulding in any desired shape
All the above.

Correct Answer: All the above.

← Previous Question Next Question→

More Questions from RCC Structures Design

In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or
A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is
If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose φ, the lateral intensity of pressure p2 is
The maximum shear stress (qmax) in a rectangular beam is
If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be
The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than
Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of
If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion