The width of the rib of a T-beam, is generally kept between

More Questions from RCC Structures Design

• The advantage of reinforced concrete, is due to
• In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or
• A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is
• If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose φ, the lateral intensity of pressure p2 is
• The maximum shear stress (qmax) in a rectangular beam is
• If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
• According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
• A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be
• The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than
• Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of

Discussion & Comments