Curioustab

Home » Civil Engineering » RCC Structures Design

The maximum ratio of span to depth of a cantilever slab, is

8
10
12
14
16

Correct Answer: 12

← Previous Question Next Question→

More Questions from RCC Structures Design

The width of the rib of a T-beam, is generally kept between
The advantage of reinforced concrete, is due to
In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or
A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is
If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose φ, the lateral intensity of pressure p2 is
The maximum shear stress (qmax) in a rectangular beam is
If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be
The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion