Curioustab

Home » Civil Engineering » RCC Structures Design

To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is

0.107 L
0.207 L
0.307 L
0.407 L

Correct Answer: 0.207 L

← Previous Question Next Question→

More Questions from RCC Structures Design

The depth of the centre of gravity (y) of the resultant compressive stress from the compression edge of the T-beam specified in Q. 13.52 is given by
If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
Distribution of shear intensity over a rectangular section of a beam, follows :
An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is
If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance x from either end where x is
The maximum ratio of span to depth of a cantilever slab, is
The width of the rib of a T-beam, is generally kept between
The advantage of reinforced concrete, is due to
In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or
A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion