The difference in the lengths of two diagonals of a rail diamond is
Civil Engineering
Railways
Choose an option
Answer
Correct Answer:
Discussion & Comments
No comments yet. Be the first to
comment!
Posting...
More Questions from Railways
- Fastenings — select the typical overall depth (length) of a standard dog spike used in Indian permanent way practice.
- History of Indian gauge selection — as Consulting Engineer to the Government of India, W. Simms recommended which gau...
- Railway track materials: Which sleeper type most closely satisfies the requirements of an ideal sleeper in terms of d...
- Wheelset geometry: The distance between the inner faces of a railway wheelset’s flanges relative to the track gauge i...
- Permanent way on sharp curves: What is the standard clearance between the inner running rail and its check rail provi...
- Ballast maintenance terminology: In routine track upkeep, “boxing of ballast” is carried out primarily at which locat...
- Turnout geometry: If α is the switch angle and R is the radius of the turnout curve, what is the approximate length o...
- Joint detail in continuously welded rail (CWR): A welded rail joint is generally arranged to be…
- Rail fastenings: For holding the rail in position, chairs are not used with which rail section?
- Cast-iron “pot” sleepers: Which configuration correctly describes the arrangement of bowls (pots) and tie bars in pot...