Curioustab

Home » Digital Electronics » Counters

One method of troubleshooting involves the circuit under test with a or and then observing the output to check for proper bit patterns.

checking, voltmeter, ohmmeter
exercising, stimulus, test pattern
testing, scope, logic analyzer
smashing, hammer, axe

Correct Answer: exercising, stimulus, test pattern

← Previous Question Next Question→

More Questions from Counters

The given circuit represents a(n) ________.
Many parallel counters use ________ presetting whereby the counter is preset on the active transition of the same clock signal that is used for counting.
The technique used by one-shots to respond to an edge rather than a level is called ________.
Assume you want to determine the timing diagram for a 4-bit counter using an oscilloscope. The best choice for an oscilloscope trigger signal is ________.
Asynchronous counters are often called ________ counters.
Assume a 4-bit ripple counter has a failure in the second flip-flop such that it "locks up." The third and fourth stages will ________.
A reliable method for eliminating decoder spikes is the technique called ________.
A glitch that appears on the decoded output of a ripple counter is often difficult to see on an oscilloscope because ________.
Shift-register counters use ________, which means that the output of the last FF in the register is connected back to the first FF in some way.
A 4-bit binary up counter has an input clock frequency of 20 kHz. The frequency of the most significant bit is ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion