logo

CuriousTab

CuriousTab

Building Construction problems


  • 1. While investigating the site, a thick layer of fairly firm clay over a deep layer of soft clay is encountered. In such a situation, the following type of foundation is useful :

  • Options
  • A. pile formation
  • B. raft foundation
  • C. grillage foundation
  • D. none of these.
  • Discuss
  • 2. Herringbone bond is used for

  • Options
  • A. walls having thickness more than 4 bricks
  • B. architectural finish to the face work
  • C. ornamental panels in brick flooring
  • D. all the above.
  • Discuss
  • 3. If height of the first storey of a building is 3.2 m and riser is 13 cm, the number of treads required, is

  • Options
  • A. 12
  • B. 18
  • C. 24
  • D. 25
  • E. 30.
  • Discuss
  • 4. The vertical member running through middle of a shutter frame, is

  • Options
  • A. style
  • B. reveal
  • C. mullion
  • D. post.
  • Discuss
  • 5. A temporary rigid structure having platforms to enable masons to work at different stages of a building, is known as

  • Options
  • A. scaffolding
  • B. dead shore
  • C. raking shore
  • D. under pinning.
  • Discuss
  • 6. The inner section of a cavity wall, is generally known as

  • Options
  • A. butress
  • B. leaf wall
  • C. pillaster
  • D. pillar.
  • Discuss
  • 7. Pick up the correct statement from the following :

  • Options
  • A. the sand in the sand pile is well compacted
  • B. the sand is kept moist at the time of placing and tamping
  • C. the top one metre of the pile is filled up with cement concrete to provide a cap for the filled up sand
  • D. sand piles are generally used under column loads
  • E. all of the above.
  • Discuss
  • 8. The depth of concrete bed of the foundation depends upon

  • Options
  • A. the projection of the concrete block beyond the footing over it
  • B. the upward soil pressure
  • C. the mix of the concrete
  • D. all the above.
  • Discuss
  • 9. If a is the offset of concrete bed in cms, and d is the depth of concrete bed in cms, then

  • Options
  • A. d = 0.445 a
  • B. 0.557 a
  • C. d = 0.775 a
  • D. none of these.
  • Discuss
  • 10. The depth of excavation of foundations, is generally measured with a

  • Options
  • A. ranging rod
  • B. steel tape
  • C. levelling staff
  • D. bonning rod.
  • Discuss

First 12 13 14 ... 18 .. 22 23 Last