Curioustab

Home » Mechanical Engineering » Strength of Materials

For a 25 mm hole drilled in plates, the diameter of rivet shank should be

23mm
24.5mm
25mm
26mm

Correct Answer: 23mm

← Previous Question Next Question→

More Questions from Strength of Materials

The shear force of a simply supported beam carrying a central point load changes sign at its midpoint.
The efficiency of a riveted joint is the ratio of the strength of the joint to the strength of the solid plate.
The elongation of a conical bar under its own weight is __________ that of prismatic bar of the same length.
The Rankine's theory for active earth pressure is based on the assumption that
An overhanging beam must overhang on both sides.
A thin spherical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p). The stress in the shell material is
The maximum tangential stress in a thick cylindrical shell is always __________ the internal pressure acting on the shell.
The bending moment in the centre of a simply supported beam carrying a uniformly distributed load of w per unit length is
The strain energy stored in a spring, when subjected to maximum load, without suffering permanent distortion, is known as
The given figure shows the Mohr's circle of stress for two unequal and like principal stresses (σx and σy) acting at a body across two mutually perpendicular planes. The normal stress on an oblique section making an angle θ with the minor principle plane is given by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion