Deflection of a cantilever with uniformly distributed load: Maximum deflection in terms of W = w * l

Introduction / Context:Deflection formulas are central to serviceability checks. For a cantilever of length l with a uniformly distributed load w (per unit length), maximum deflection occurs at the free end. The problem defines W = w * l for convenience, and asks for the deflection in that form.

Given Data / Assumptions:

• Cantilever length = l.
• UDL intensity = w, total load W = w * l.
• Young’s modulus = E, second moment of area = I.
• Small deflection theory, prismatic beam.

Concept / Approach:Standard result for a cantilever with UDL: y_max = w * l^4 / (8 * E * I). Substituting W = w * l gives y_max = (W * l^3) / (8 * E * I). This is obtained by integrating beam differential equations or using tabulated results.

Step-by-Step Solution:

Verification / Alternative check:Dimensional check: numerator has force * length^3; denominator E * I has force * length^2; result is length, as required.

Why Other Options Are Wrong:W * l^3 / (3 * E * I) is the cantilever tip load case factor; the 48 denominators belong to simply supported beam formulae; W * l^2 / (8 * E * I) has wrong power of l.

Common Pitfalls:Mixing up the 8 vs 3 vs 48 factors; forgetting to substitute W = w * l correctly; using simply supported results for cantilever problems.

Final Answer:W * l^3 / (8 * E * I)