Maximum efficiency of class B power amplifier is 50%.

More Questions from Analog Electronics

• In the amplifier circuit of figure hfe = 100 and hie = 1000 Ω. The voltage gain of amplifier is about
• Si transistor of following figure has a = 0.9 and ICE= 0, VEE = 5 V and VCC = 13 V, then RE will be if IEQ = 1 mA
• In figure what is the base current if VBE = 0.7 V
• The load impedance ZL of a CE amplifier has R and L in series. The phase difference between output and input will be
• An amplifier with loop gain Aβ will be more stable for value of Aβ as
• A bridge rectifier circuit has input of 50 Hz frequency. The load resistance is RL and filter capacitance is C. For good output wave shape, the time constant RLC should be at least equal to
• In figure The minimum and maximum load currents are
• An exponential amplifier has diode in feedback path.
• Consider the following statements : A clamper circuit adds or subtracts a dc voltage to a waveform does not change the waveform amplifiers the waveform Which are correct?
• Gain of the amplifier is 'A'. Then the I/P impedance and O/P impedance of the closed loop amplifier shown below would be

Discussion & Comments