logo

CuriousTab

CuriousTab

Discussion


Home Technical Drawing Threads, Fasteners and Springs Comments

  • Question
  • The standard number of threads per inch for various diameters is the:


  • Options
  • A. Series of thread
  • B. Lead
  • C. Major diameter
  • D. Thread pitch

  • Correct Answer
  • Series of thread 


  • Threads, Fasteners and Springs problems


    Search Results


    • 1. This is the bottom surface joining the sides of two adjacent threads:

    • Options
    • A. Lead
    • B. Pitch
    • C. Crest
    • D. Root
    • Discuss
    • 2. The distance a screw thread advances axially in one turn is the:

    • Options
    • A. Lead
    • B. Pitch
    • C. Turn
    • D. Crest
    • Discuss
    • 3. This type of fit is high quality and is used for the bulk of interchangeable screw thread work:

    • Options
    • A. Class 1
    • B. Class 2
    • C. Class 3
    • D. Class 4
    • Discuss
    • 4. These include taper pins, straight pins, dowel pins, clevis pins, and cotter pins:

    • Options
    • A. Bolts
    • B. General fasteners
    • C. Machine pins
    • D. Rivets
    • Discuss
    • 5. This is the smallest diameter of a screw thread:

    • Options
    • A. Internal thread diameter
    • B. Minor diameter
    • C. Major diameter
    • D. External thread diameter
    • Discuss
    • 6. Oblique drawings are dimensioned in a similar fashion as these types of drawings:

    • Options
    • A. Orthographic
    • B. Isometric
    • C. Angular
    • D. Parallel
    • Discuss
    • 7. In a CAD system, you can draw an ellipse by specifying these:

    • Options
    • A. The bounding lines
    • B. The midpoint and end points
    • C. The center and major and minor axes
    • D. The center and radius
    • Discuss
    • 8. When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:

    • Options
    • A. Cabinet projection
    • B. Cavalier projection
    • C. Axonometric projection
    • D. Isometric projection
    • Discuss
    • 9. Oblique sections are useful to show this:

    • Options
    • A. Foreshortened features
    • B. Oblique lines
    • C. Interior shapes
    • D. Projected features
    • Discuss
    • 10. In oblique projection, important shapes should be in this position relative to the viewing plane:

    • Options
    • A. Parallel
    • B. Perpendicular
    • C. Adjacent
    • D. Rotated
    • Discuss


    Comments

    There are no comments.

Enter a new Comment