Tolerancing problems
- 1. This is the measured size of a finished part:
Options- A. Actual size
- B. Dimensioned size
- C. Production size
- D. Basic size Discuss
Correct Answer: Actual size
- 2. This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:
Options- A. Applying allowances
- B. Geometric dimensioning and tolerancing
- C. Creating datum references
- D. Angular dimensioning tolerances Discuss
Correct Answer: Geometric dimensioning and tolerancing
- 3. This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
Options- A. Limits
- B. Fit
- C. Specifications
- D. Allowance Discuss
Correct Answer: Fit
- 4. This means that a feature of a finished product contains the maximum amount of material permitted by the toleranced dimensions for that feature:
Options- A. Maximum material condition
- B. Machined material condition
- C. Maximum machined indication
- D. Machine mark indication Discuss
Correct Answer: Maximum material condition
- 5. This is the theoretically exact size from which limits of size are determined:
Options- A. Actual Size
- B. Dimensioned size
- C. Production size
- D. Basic size Discuss
Correct Answer: Basic size
- 6. Acceptable parts must not extend beyond this:
Options- A. Boundary limits
- B. Hole limits
- C. Specification
- D. Tolerances Discuss
Correct Answer: Boundary limits
- 7. When lines intersect on a drawing at angles of this many degrees, it is customary not to dimension the angle:
Options- A. 360
- B. 180
- C. 90
- D. 45 Discuss
Correct Answer: 90
- 8. Unilateral tolerances have traditionally been given on angles.
Options- A. True
- B. False Discuss
Correct Answer: False
- 9. Allowance is the maximum clearance or minimum interference specified to achieve a fit between two mating parts.
Options- A. True
- B. False Discuss
Correct Answer: False
- 10. Implied 90 degree angles typically have different general tolerances applied to them than other angles covered by a general note.
Options- A. True
- B. False Discuss
Correct Answer: False
More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.