Computer Aided Design Basics problems
- 1. A line with a tapering width can be easily created by using the ________ tool.
Options- A. circle
- B. eclipse
- C. line
- D. polyline Discuss
Correct Answer: polyline
- 2. If you use the absolute coordinate system to create a line from a starting point of 0, 0 8 units on the X axis and 5 units on the Y axis you enter ________ for the second point.
Options- A. 8,5
- B. 5,8
- C. 0,8
- D. 5,0 Discuss
Correct Answer: 8,5
- 3. Understanding the Cartesian coordinate system will help the beginning drafter ________.
Options- A. control the accuracy of the drawing
- B. produce a visible grid system
- C. select a different text style
- D. choose various line types Discuss
Correct Answer: control the accuracy of the drawing
- 4. In order to set drawing limits for a "C" size architectural drawing the drafter should set the limits to ________.
Options- A. 0,0 and 2,9
- B. 0,0 and 17,11
- C. 0,0 and 18,24
- D. 0,0 and 34,24 Discuss
Correct Answer: 0,0 and 18,24
- 5. When drawing a line using the relative coordinate system a line is created from ________.
Options- A. 0,0
- B. the ending point of the last line
- C. the beginning point of the last line
- D. none of the above Discuss
Correct Answer: the ending point of the last line
- 6. When setting up a mechanical drawing in AutoCAD the drafter should set the units to ________.
Options- A. fractional
- B. decimal
- C. architectural
- D. metric Discuss
Correct Answer: decimal
- 7. The UCS icon represents the intersection of the ________.
Options- A. X axis
- B. Y axis
- C. Z axis
- D. All of the above Discuss
Correct Answer: All of the above
- 8. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Options- A. type @3<45 and enter
- B. type 3 back slash and enter
- C. type 3 forward slash and enter
- D. type 3 and try to use the Dynamic Input readout to find the end point Discuss
Correct Answer: type @3<45 and enter
- 9. When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
Options- A. pull the line from away from the starting point very carefully
- B. insure that Ortho is on
- C. enter 3 for the length of the line
- D. read the coordinate position on the Dynamic Readout Discuss
Correct Answer: insure that Ortho is on
- 10. One quick way to view the entire drawing area is to use the Zoom command by typing ________.
Options- A. type Z enter A enter
- B. type Z enter E enter
- C. type SHOWALL enter
- D. type ALL enter Discuss
Correct Answer: type Z enter A enter
More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.