Discussion
Home ‣ Technical Drawing ‣ Threads, Fasteners and Springs Comments
- Question
These include taper pins, straight pins, dowel pins, clevis pins, and cotter pins:
Options- A. Bolts
- B. General fasteners
- C. Machine pins
- D. Rivets
- Correct Answer
- Machine pins
- 1. This is the smallest diameter of a screw thread:
Options- A. Internal thread diameter
- B. Minor diameter
- C. Major diameter
- D. External thread diameter Discuss
- 2. This type of thread is a thread on the inside of a member:
Options- A. Basic thread
- B. External thread
- C. Internal thread
- D. Major diameter thread Discuss
- 3. There should be a visible gap between the wall and the ________ line.
Options- A. dimension
- B. extension
- C. center
- D. leader Discuss
- 4. Dimension text is generally placed above the ________ line.
Options- A. Dimension
- B. extension
- C. center
- D. leader Discuss
- 5. Dimensions are used on the elevation plan to describe ________.
Options- A. Finished floor elevations
- B. Roof overhangs
- C. Roof pitch angles
- D. All of the above Discuss
- 6. This type of fit is high quality and is used for the bulk of interchangeable screw thread work:
Options- A. Class 1
- B. Class 2
- C. Class 3
- D. Class 4 Discuss
- 7. The distance a screw thread advances axially in one turn is the:
Options- A. Lead
- B. Pitch
- C. Turn
- D. Crest Discuss
- 8. This is the bottom surface joining the sides of two adjacent threads:
Options- A. Lead
- B. Pitch
- C. Crest
- D. Root Discuss
- 9. The standard number of threads per inch for various diameters is the:
Options- A. Series of thread
- B. Lead
- C. Major diameter
- D. Thread pitch Discuss
- 10. Oblique drawings are dimensioned in a similar fashion as these types of drawings:
Options- A. Orthographic
- B. Isometric
- C. Angular
- D. Parallel Discuss
Threads, Fasteners and Springs problems
Search Results
Correct Answer: Minor diameter
Correct Answer: Internal thread
Correct Answer: extension
Correct Answer: Dimension
Correct Answer: All of the above
Correct Answer: Class 2
Correct Answer: Lead
Correct Answer: Root
Correct Answer: Series of thread
Correct Answer: Isometric
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.