Dimensioning Architectural Drawings problems
- 1. The second line of dimensions out from the plan generally includes ________.
Options- A. Centers of doors and windows
- B. The distances between outside walls and interior walls.
- C. The measurement from the outside of the brick to the inside of the exterior wall.
- D. The measurement from one outside corner to the opposite outside corner. Discuss
Correct Answer: The distances between outside walls and interior walls.
- 2. Architectural dimensioning standards allow for the placement of dimensions inside the floor plan. These inside dimensions locate interior ________.
Options- A. door openings and walls
- B. centers of cabinets
- C. windows
- D. all of the above Discuss
Correct Answer: door openings and walls
- 3. Architectural dimensioning is usually done in ________.
Options- A. Even numbers
- B. Feet and inches
- C. Feet only
- D. Inches only Discuss
Correct Answer: Feet and inches
- 4. The architectural and construction industries use the United States National CAD standard (NCS) system on many ________ projects.
Options- A. residential
- B. commercial
- C. aerospace
- D. publicly funded Discuss
Correct Answer: publicly funded
- 5. Some of the standard AutoCAD text styles used in architectural drawings includes ________.
Options- A. CityBlueprint
- B. CountryBlueprint
- C. Stylus BT
- D. All of the above Discuss
Correct Answer: All of the above
- 6. The dimension text size is determined by what the architect deems necessary in ________.
Options- A. Model space
- B. Paper space
- C. The Finished plot
- D. The PDF file Discuss
Correct Answer: The Finished plot
- 7. When dimensioning architectural drawings architects will utilize both ________ and ________ options.
Options- A. Baseline and continuous
- B. Baseline and linear
- C. Quick dim and linear
- D. Linear and continuous Discuss
Correct Answer: Linear and continuous
- 8. Dimensions are used on the elevation plan to describe ________.
Options- A. Finished floor elevations
- B. Roof overhangs
- C. Roof pitch angles
- D. All of the above Discuss
Correct Answer: All of the above
- 9. Dimension text is generally placed above the ________ line.
Options- A. Dimension
- B. extension
- C. center
- D. leader Discuss
Correct Answer: Dimension
- 10. There should be a visible gap between the wall and the ________ line.
Options- A. dimension
- B. extension
- C. center
- D. leader Discuss
Correct Answer: extension
More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.