Discussion
Home ‣ Digital Electronics ‣ Shift Registers Comments
- Question
The group of bits 11001 is serially shifted (right-most bit first) into a 5-bit parallel output shift register with an initial state 01110. After three clock pulses, the register contains ________.
Options- A. 01110
- B. 00001
- C. 00101
- D. 00110
- Correct Answer
- 00101
- 1. To operate correctly, starting a ring shift counter requires:
Options- A. clearing all the flip-flops
- B. presetting one flip-flop and clearing all others
- C. clearing one flip-flop and presetting all others
- D. presetting all the flip-flops Discuss
- 2. When the output of a tristate shift register is disabled, the output level is placed in a:
Options- A. float state
- B. LOW state
- C. high-impedance state
- D. float or high-impedance state Discuss
- 3. When is it important to use a three-state buffer?
Options- A. when two or more outputs are connected to the same input
- B. when all outputs are normally HIGH
- C. when all outputs are normally LOW
- D. when two or more outputs are connected to two or more inputs Discuss
- 4. What are the three output conditions of a three-state buffer?
Options- A. HIGH, LOW, float
- B. 1, 0, float
- C. both of the above
- D. neither of the above Discuss
- 5. How would a latch circuit be used in a microprocessor system?
Options- A. as transportation for Intel employees
- B. for a group of data that is the same
- C. as a set of common connections for transfer of data Discuss
- 6. The bit sequence 10011100 is serially entered (right-most bit first) into an 8-bit parallel out shift register that is initially clear. What are the Q outputs after four clock pulses?
Options- A. 10011100
- B. 11000000
- C. 00001100
- D. 11110000 Discuss
- 7. Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit first.)
Options- A. 1100
- B. 0011
- C. 0000
- D. 1111 Discuss
- 8. On the third clock pulse, a 4-bit Johnson sequence is Q0 = 1, Q1 = 1, Q2 = 1, and Q3 = 0. On the fourth clock pulse, the sequence is ________.
Options- A. Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
- B. Q0 = 1, Q1 = 1, Q2 = 0, Q3 = 0
- C. Q0 = 1, Q1 = 0, Q2 = 0, Q3 = 0
- D. Q0 = 0, Q1 = 0, Q2 = 0, Q3 = 0 Discuss
- 9. The group of bits 10110111 is serially shifted (right-most bit first) into an 8-bit parallel output shift register with an initial state 11110000. After two clock pulses, the register contains ________.
Options- A. 10111000
- B. 10110111
- C. 11110000
- D. 11111100 Discuss
- 10. What is meant by parallel load of a shift register?
Options- A. All FFs are preset with data.
- B. Each FF is loaded with data, one at a time. Discuss
Shift Registers problems
Search Results
Correct Answer: presetting one flip-flop and clearing all others
Correct Answer: float or high-impedance state
Correct Answer: when two or more outputs are connected to the same input
Correct Answer: both of the above
Correct Answer: as a set of common connections for transfer of data
Correct Answer: 11000000
Correct Answer: 0000
Correct Answer: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
Correct Answer: 11111100
Correct Answer: All FFs are preset with data.
Comments
pyClapy
75 1 1mL Liquid Topical 70 mL 100mL Gel Topical 3 g 5g Liquid Topical 62 g 100g Gel Topical 91 mL 130mL Gel Topical 66
75 1 1mL Liquid Topical 70 mL 100mL Gel Topical 3 g 5g Liquid Topical 62 g 100g Gel Topical 91 mL 130mL Gel Topical 66
More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.
Rivera HernГЎndez, S