Home » Computer Science » Windows NT

Dynamic Host Configuration Protocol [DHCP]

is the same as bootp
uses static allocation of IP addresses
helps prevent conflicts between assigned IP addresses
assigns IP addresses, which when allocated, cannot be reused
None of the above

Correct Answer: helps prevent conflicts between assigned IP addresses

← Previous Question Next Question→

More Questions from Windows NT

You need to install network adapters in 20 ISA-bus computers. Which rule must you follow when installing the network adapters?
A one-way trust relationship has been established in which the RESEARCH domain trusts the TESTING domain. The Guest account is disabled in both domains. As a user belonging to a global group called Testers in the TESTING domain, you want to access a shared directory on a Windows NT Advanced Server in the RESEARCH domain. Which action would give you access?
Assume that all users are members of the ACE domain and that most of the resources exist in the PUBS and CAD domains. You are a user with administrator rights in all domains. How would you allow users to access all of the resources, with a minimum set of trust relationships?
In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?
You install Windows NT Server on a computer, making the computer a backup domain controller in an existing domain. After installation, you discover that you used the wrong domain name. What should you do?
Why does a high number of broadcast messages adversely affect overall network performance?
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?
You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?
The rating in bits per second for UTP Cat 5 wiring is
You want to connect 2 networks that are both lOBaseT Ethernet networks. The 2 networks are located in separate buildings so that they are approximately 1,000 meters apart. Which media should you use?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion