Curioustab

Home » Civil Engineering » Structural Design Specifications

Pick up the correct precaution while spilicing the reinforcing bars

These are provided away from the sections of maximum stress
These are staggered
These are provided if the B.M. is more than 50% of M.R.
Not more than half the bars are spliced at a section
All the above.

Correct Answer: All the above.

← Previous Question Next Question→

More Questions from Structural Design Specifications

For the plain reinforcing bars in compression, the permissible design bond stress in tension, is increased by
If the dimensions of a rectangular section of a short column are 15 cm x 20 cm, its unsupported length should be restricted to
For rolled I-beams and channels, permissible tensile and compressive stresses does not exceed
For the reinforced concrete member totally immersed in sea water, the normal cover provided for the reinforcing bars is further increased by
The test strength of the sample is taken as the average of the strength of
The reduced level of third floor of a building near a column is 205.350 m. The reduced levels of the undersides of four beams supporting the fourth floor framing into the column mutually perpendicular are 208.350 m, 208.450 m, 208.500 m and 208.550 m. The supported length of the column is
Pick up the correct statement from the following:
The distance of the critical section for shear from the periphery of the column or drop panal is at a distance (where d is effective depth of flat slab).
In limit state method, the design bond stress of M 30 grade concrete for plain bars in tension, is
The maximum characteristic strength of the stirrups reinforcement, is taken

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion