The approximate value of torsion constant k for a box of depth d, width b, and having uniform thickness t, is

More Questions from Structural Design Specifications

• A continuous beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is
• Pick up the correct precaution while spilicing the reinforcing bars
• For the plain reinforcing bars in compression, the permissible design bond stress in tension, is increased by
• If the dimensions of a rectangular section of a short column are 15 cm x 20 cm, its unsupported length should be restricted to
• For rolled I-beams and channels, permissible tensile and compressive stresses does not exceed
• For the reinforced concrete member totally immersed in sea water, the normal cover provided for the reinforcing bars is further increased by
• The test strength of the sample is taken as the average of the strength of
• The reduced level of third floor of a building near a column is 205.350 m. The reduced levels of the undersides of four beams supporting the fourth floor framing into the column mutually perpendicular are 208.350 m, 208.450 m, 208.500 m and 208.550 m. The supported length of the column is
• Pick up the correct statement from the following:
• The distance of the critical section for shear from the periphery of the column or drop panal is at a distance (where d is effective depth of flat slab).

Discussion & Comments