Curioustab

Home » Civil Engineering » Soil Mechanics and Foundation Engineering

Depending upon the properties of a material, the failure envelope may

be either straight or curved
pass through the origin of stress
intersect the shear stress axis
all the above.

Correct Answer: all the above.

← Previous Question Next Question→

More Questions from Soil Mechanics and Foundation Engineering

Pick up the correct statement applicable to plate load test
The fundamental equation of specific gravity (G), dry density (γd), unit weight of water (γω) and void ratio (e), is
The factor which affects the compaction, is
The specific gravity of sands, is approximately
A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3, is
A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is
The capillary rise of water
Over-consolidation of soils is caused due to
A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is
A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion