Curioustab

Home » Civil Engineering » Railways

Wooden sleepers used on the girders of bridges, are generally made of

sal
chir
teak
deodar.

Correct Answer: teak

← Previous Question Next Question→

More Questions from Railways

Rails are bent to correct curvature if the degree of curve, is more than
Pick up the incorrect statement from the following:
If L1 and L2 are actual and theoretical lengths of a tongue rail, d is heel divergence and t is thickness of tongue rail at toe, the switch angle α is
Dimensions of a plate girder, are :
Best ballast contains stones varying in size from
Minimum depth of ballast prescribed of B.G. trunk lines of Indian Railways, is
To design a cross-over between parallel tracks, the required components are :
On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is
A scissors cross-over consists of
Rail joint supported on a single sleeper, is known

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion