Curioustab

Home » Civil Engineering » Railways

Bearing plates are used to fix

flat footed rails to the wooden sleepers
double headed rails to the wooden sleepers
bull headed rails to the wooden sleepers
flat footed rails to the cast iron sleepers
none of these.

Correct Answer: flat footed rails to the wooden sleepers

← Previous Question Next Question→

More Questions from Railways

If D is distance between centres of two parallel track of gauge G, then, total length of cross-over (from the point of commencement to the point of termination) with an intermediate straight portion and N crossing, is given by
The quantity of stone ballast required per metre tangent length, is
If a 0.7% upgrade meets a 0.65% downgrade at a summit and the permissible rate of change of grade per chain length is 0.10%, the length of the vertical curve, is
For flat bottom sleepers, maximum size of ballast, is
A kink is made in stock rails, ahead of the toe of switch at a distance of
At a rail joint, the ends of adjoining rails, are connected with a pair of fish plates and
Coning of wheels
According to Railway Board, no diamond crossing should be flatter than
Coning of wheels is provided
Regional Indian railways use different types of sleepers according to their

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion