Curioustab

Home » Civil Engineering » Applied Mechanics

The moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter is 6 cm, about centroidal axis, is

437.5 cm4
337.5 cm4
237.5 cm4
137.5 cm4
37.5 cm4.

Correct Answer: 137.5 cm4

← Previous Question Next Question→

More Questions from Applied Mechanics

A load of 500 kg was lifted through a distance of 13 cm. by an effort of 25 kg which moved through a distance of 650 cm. The velocity ratio of the lifting machine is
The centre of gravity of the trapezium as shown in below figure from the side is at a distance of
A satellite is said to move in a synchronous orbit if it moves at an altitude of 36, 000 km with a maximum velocity of about
For perfectly elastic bodies, the value of coefficient of restitution is
A trolley wire weighs 1 kg per metre length. The ends of the wire are attached to two poles 20 m apart. If the horizontal tension is 1000 kg, the central dip of the cable is
The moment of inertia of the shaded portion of the area shown in below figure about the X-axis, is
A rod 5 m in length is moving in a vertical plane. When it is inclined at 60° to horizontal, its lower end is moving horizontally at 3 m/sec and upper end is moving in vertical direction. The velocity of its upper end, is
Pick up the correct statement from the following. A rubber ball when strikes a wall rebounds but a lead ball of same mass and velocity when strikes the same wall, falls down
A ball is dropped from a height of 2.25 m on a smooth floor and rises to a height of 1.00 m after the bounce. The coefficient of restitution between the ball and the floor is
The resultant of two forces acting at right angles is 5 kgf and if they act at an angle of 60°, it is 37 kgf. The magnitudes of the forces are :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion